Trademaster RF 270S, Инструкция по эксплуатации

Страница: 7 / 24

6
B Fig. B
then repeat the running test.
6.
Keep machine always out from sun, dust, wet, or raining area.
5-3.Installation:
(1) Always Keep proper footing & balance while moving this 208kgs machine. And
only use heavy-duty fiber belt to lift the machine as per Fig. (B).
(2) Hang the machine up, away from the floor, take away the 4 pads and assemble
them on the auxiliary stand. Fix the machine on the auxiliary stand and lock the
connection nut.
(3) Finish removing this wooden case/crate from the machine. Unbolt the machine
from the crate bottom.
(4) Position & tighten 4 bolts into base holes properly after machine in balance.
(5) Turn off the power before wiring & be sure machine is in proper grounding.
Overload & circuit breaker is recommended for safety wiring.
(6) Keep machine always out from sun, dust, wet, raining area.
5-4.CLEAIG & LURICATING
(1) Your machine has been coated with a heavy grease to protect it in shipping. This coating should be completely
removed before operating the machine. Commercial degreaser, kerosene or similar solvent may be used to
remove the grease from the machine, but avoid getting solvent on belts or other rubber parts.
(2) After cleaning, coat all bright work with a light lubricant. Lubricate all points . with a medium consistency
machine oil.
6.MINIMUM ROOM SPACE FOR MACHINE OPERATION
82.5 ”
133 ”
97.5 ”