CHANGING THE SOLDERING TIP
Ensure the tip is cool and Soldering Iron is switched off and unplugged from
mains current and the tip temp indicator off before touching the tip as serious
burns could occur to skin if touched
1.
Loosen the sleeve - counter clockwise (Fig. 6)
2.
Remove the tip and replace. (Fig.7)
3.
Tighten the sleeve securely. - clock wise (Fig. 6)
SOLDERING HINTS
z
Ensure the soldering tip and work items are clean.
z
Re-tin the tip (cover the heated tip with solder) prior to use.
z
Use the soldering iron to heat the work items and apply solder directly to the
work items – not to the soldering iron tip.
z
Clean the tip with a damp sponge or
Tradeflame’s Brass Tip Cleaning brass
wire (part number: 218167).
after use – do not file tip.
ASSEMBLY/CHARGING
z
Recharge Soldering Iron with USB C cord provided by manufacture.
z
When power to USB is switched on the Charging indicator light
(Fig. 1 / viii) with light up.
z
Light indicators:
z
Blinking - Charging
z
Solid - Fully charged switch off
OPERATION 218012
1.
Prepare the work area and piece
2.
Make sure Soldering Iron tip is fixed in position and tightened.
3.
Slide ON / off switch forward to turn on the Soldering Iron (Fig. 1 / iv).
4.
Allow the tool to come to full temperature. Temp Indicator:
z
Blinking Green - Heating
z
Solid Green - target temperature is reached. (Fig. 1 / vi)
5.
Surfaces of the connection points must be clean.
6.
“Tin” the tip by covering the heated tip with rosin core solder.
7.
Use the Soldering Iron to heat the connection points, not the solder.
8.
Apply only enough solder to the heated parts.
9.
Allow the joint to cool undisturbed.
10.
To turn off the Soldering Iron, press the, turn off tool by pressing back the
On / off switch (Fig. 1 / iv).
11.
While still hot, clean the tip with a lightly damp sponge or
Tradeflame’s
Brass Tip Cleaning brass wire (part number: 218167).
WARNING!
Avoid contact, tip is hot and could cause serious burns.
12.
Place iron on its side with the tip away from any contact until it has cooled
(Fig. 2) Temp Indicator:
z
Solid Red - Cooling
13.
Let the Soldering Iron to cool down naturally
WARNING!
Do not touch tip
until Indicator light turns off, indicating the tool has cooled. Storing a hot
tool could cause fire
14.
Once tip has cooled place its Protective cap (Fig. 1 / x) back on the
Soldering Iron and store is a safe and dry space.
Fig. 7
Fig. 6
Distributed by
TRADEPEM INDUSTRIAL PTY LTD.
