Model TEEPEE-1 Teepee Style Bed Frame
Revised 06/04/2017
Page
7 of 10
Step 3: Fasten mattress support bars [B] to support rail of frame side [L] using screws [C]. Use (1)
screw at each end of support bar. Make sure support bar end is tight and perpendicular with side of
bed. Start at rear of bed and work towards front. Leave 4.5” gaps between each support bar
(approximately 7” center-to-center). Ensure that bed frame remains square as supports are added.
When completed and square, fully tighten end hardware from previous step.
