Model SPSHTL-8 Space Shuttle Bed Frame
Revised 05/19/2018
Page
6 of 7
Step 3 - V: Fasten auxiliary rear assembly [A2] to back of headboard [D] using 3” long lag screws [N]
and washers [F]. Use (1) washer on each screw. Insert the lag screws through the side with the
larger holes, and screw through the assembly towards the side with the smaller holes. Assemblies
pictured are for reference only; individual assembly types will vary with bed model. For exact fit and
style, refer to picture on cover of manual.
