Assembly Steps
Step 1: Ensure there is enough room to lay out all parts. Carefully unpack all parts and hardware
and check that everything is present and undamaged. It is helpful to have more than one person
available for assembly.
Step 3: Tighten all hardware. Make sure all assembled parts are tight and secure.
Model GASHLF-7 Bed Frame Accessory
Revised 11/18/2016
Page
5 of 5
Step 2:
--Fasten shelves [D] to side panels [E] with lag screws [A] using (1) washer [B] on each lag screw.
--Fasten back [F] to unit using wood screws [C] through pre-drilled holes.
