10
Once all cables are connected, follow these steps
to install the receiver inside the vehicle.
a.
Attach the two mounting brackets to the
sides of the unit using three #2-56 screws.
Simply screw these fasteners into the vent
slots (see Figure 11).
b.
Secure the brackets to the mounting surface
using appropriate 1/4" fasteners (not
supplied).
NOTE:
Be sure to leave enough slack in the
connecting cables (service loop) for easy serviceability.
c.
Place the RF converter at least 3 feet away
from the receiver (see Figure 12). If it is too
close to the receiver, the remote control might
not operate properly. Also avoid placing the
RF converter behind a metal surface or in an
area surrounded by metal.
d.
If desired, mount the RF converter using the
supplied Velcro fasteners.
e.
Insert two AAA batteries (supplied in the
kitpack) in the remote control’s battery
compartment (see Figure 13).
Bracket
#2-56 x 1⁄4"
S
crews (x
3
)
1⁄4" Fasteners (x4)
(not supplied)
Figure 11: Receiver Mounting
To avoid overheating, do not block the upper
vents of the receiver.
IMPORTANT!
Figure 12: RF Converter
AAA B
a
tterie
s
Figure 13: Remote Control Batteries
Mount the Receiver
8
