TracVision C3, Руководство по установке

Страница: 14 / 24

15
Find your U.S. or Canadian satellite TV service
below to determine which service key(s), if any,
you need to install. Store any unused service keys
in the TracVision system’s Welcome Kit.
DIRECTV
The system is already set up from the factory for
DIRECTV service. No service keys are required
to track the DIRECTV 101 and 119 satellites.
DISH Network
Choose from among three DISH Network modes:
* Optional Master Receiver Selector (KVH part #72-0412)
required for automatic satellite switching; multiswitch
(KVH part #72-0310) required for manual switching; see
Appendix A on page 25 .
Select a DISH 1000 mode for DISH Network’s
TurboHD service. Use the map in Figure 22 to
determine the best mode for your region. Check
with DISH Network regarding local channels.
DISH 1000/129
No service keys are required.
DISH 1000/61
Connect service key “A” to the front of the
switchplate (see Figure 24).
DISH 500
Connect both service keys to the switchplate (see
Figure 24 and Figure 25).
Bell TV
(Formerly ExpressVu)
Connect service key “B” to the back of the
switchplate to set up the system to track the
Bell TV 91 and 82 satellites (see Figure 25).
NOTE: If you wish to set up the system to track
satellites not listed above, do not connect any service
keys. Refer to
Appendix B on page 26 .
Mode Satellites
DISH 1000/129* 110, 119, and 129
DISH 1000/61 110, 119, and 61
DISH 500 110 and 119
= DISH 61 Satellite Recommended
= DISH 129 Satellite Recommended
Figure 22: Recommended DISH 1000 Satellites
Figure 23: Service Keys Usage
Mode Key A Key B
DISH 1000/129 - -
DISH 1000/61 Connect -
DISH 500 Connect Connect
Bell TV - Connect
MAINTENANCE
A
A
MAINTENANCE
A
Figure 24: Connecting Service Key A (Front of Switchplate)
B
B
Figure 25: Connecting Service Key B (Back of Switchplate)
Install Service Key(s) 12
Circular Only