Wiring Option 1
STANDARD ACCESSORY POSITION INSTALLATION
Installing this way will only allow the stereo to be turned on if the key is in the accessory position.
This will also always turn the stereo off when the key is in the off position.
1.
With a razor blade, score and then strip away the insulation on the end of the wiring harness.
2.
Attach the
green
accessory wire to the factory accessory position on the key ignition switch using the
male connector.
3.
Using a
butt connector
, attach a lead wire of the
fuse holder
to the
white
power wire of the MAC.
4.
Then attach the other lead wire of the
fuse holder
to the
positive
lead on the battery, using a
ring
terminal
.
5.
Install the black wire to the
negative
lead on the battery using the other ring terminal.
CAUTION:
Install the 15 amp fuse in the fuse holder after the positive and negative leads are connected
to the battery.
WARRANTY VOIDED IF NOT CONNECTED TO A 12-VOLT POWER SOURCE!
