www.tractorsupply.com For customer support call 1-888-376-9601
6
2
SAFETY PRECAUTIONS
Never lift people or hoist loads over people. Do not lift items vertically, this winch
is designed for horizontal use only.
Never overload. Be sure all equipment used meets the winch’s maximum line pull
rating. When double-lining, pulley blocks should be rated for a minimum of two
times the winch’s line pull rating.
Do not attempt prolonged pulls with heavy loads. The electric winch is designed
for intermittent use only, and should not be used in a constant duty application.
Never pull for more than one minute or exceed the rated load. If the winch motor
becomes hot to the touch, stop the winch and allow it to cool down for several
minutes.
Never operate winch with less than 5 turns of cable around the winch drum since
the cable end may not withstand full load.
Avoid continuous pulls from extreme angles because this will cause the cable to
gather on one end of the drum and damage the cable. Be aware that the winch’s
line pull capacity is the max line pull of the first layer. Never operate winch pulling
a load that exceeds the rated capacity.
Never hook the cable back to itself because it could damage the cable.
Be sure the winch is mounted securely on the vehicle or bracket before operation.
Before moving a load, inspect the cable. Prevent kinks and uneven cable layer
before they occur. Apply proper tension to loads under 100lbs.
Do not move your vehicle to assist the winch in pulling the load. It will be easy to
overload, and cause cable damage. Be aware of the danger zone. Keep away
from the danger zone during the operation. The danger zone is the area of the
winch drum, the fairlead (if fitted), the cable, the pulley block (if used), the hook,
and the motor.
Never approach or span the cable when the winch is under load.
When using the winch to move a load, place the vehicle transmission in neutral,
set vehicle brake, and chock all wheels. The vehicle engine should be running
during winch operation so that battery has fully electricity. Never use the winch
when there is a lack of voltage.
Never disconnect free spool cultch when there is a load on the winch.
Always stand clear of the cable, hook and winch. You should disconnect the clutch
first, then use the hand saver bar to hitch the hook to pull the cable.
Inspect winch, cable, hooks and other accessories frequently. A frayed cable with
broken strands should be replaced immediately. Use heavy leather gloves when
handling the cable. Do not let the cable slide through your hands. Inspect the
cable before use. Mashed , pinched, frayed or kinked areas severely reduce the
load-carrying capability. Replacement cables must be re-spooled under 100lbs.
To keep stated tensile, re-spool the cable around the drum tightly after operation.
Do not operate winch when under the influence of drugs, alcohol or medication.
Always stay alert during operation.
Wear eye protection and personal protective equipment while operating winch.
For loads over 50% of rated line pull, the use of the pulley block/snatch block to
double the cable is recommended.
Do not operate around potentially flammable liquids, gases, or debris. Sparks
may occur, resulting in the ignition of fire.
