Tractive Technology AUTO-BLiP Скачать руководство пользователя страница 12

Copyright © 2012 Tractive Technology, LLC. All rights reserved. 

Page 12 

 

AUTO-BLiP LIMITED WARRANTY 

Tractive Technology, LLC warrants this product against defects in material and workmanship for the 
period of 90 days. The warranty period begins with the date of original retail purchase.  
 
This limited warranty is made only to the original end user purchaser ("you") of the product and does not 
extend to any subsequent purchasers or owners of the product. The "original end user" is the first user to 
put the product into service in any fashion. It is your responsibility to establish the warranty period by 
verifying the original purchase date.  
 
If you discover a defect, Tractive Technology, LLC will, at its option, repair or replace this product with a 
new or reconditioned product at no charge to you, provided you return it during the warranty period, with 
transportation charges prepaid, to Tractive Technology, LLC. (You can obtain additional information by 
contacting Tractive Technology, LLC at the address printed on the card). Please attach your name, 
address, telephone number, and a copy of the bill of sale as proof of date of original retail purchase, as 
well as a detailed description of the problem for which service is requested. Prior to returning the product, 
you must obtain from Tractive Technology, LLC a Return Merchandise Authorization Number (RMA#). 
You are responsible for packing the product to be returned. If the repairs are covered by the Limited 
Warranty and if the product was properly shipped to Tractive Technology, LLC, Tractive Technology, LLC 
will pay the return shipping charges. This warranty applies only to AUTO-BLiP product manufactured by 
Tractive Technology, LLC that can be identified by the "AUTO-BLiP" trademark, trade name, or logo 
affixed to them. This warranty does not cover damage resulting from an accident, misuse, abuse, or 
neglect and/or damage during any type of transportation resulting from improper packaging; damage to 
any product which has been altered in any fashion, including the alteration or removal of any Tractive 
Technology, LLC serial number; damage resulting from causes other than product defects, including and 
not by way of limitation, lack of technical skill, competence, or experience of the user, and/or failure to use 
the product in accordance with the instructions provided in the User's Manual; and service performance 
by an unauthorized person or entity. Any implied warranties including fitness for use and merchantability 
are limited in during to the period of the expressed warranty set forth above. The remedies provided 
under this warranty are exclusive and in lieu of all others. Tractive Technology, LLC hereby expressly 
disclaims liability and shall not be responsible for incidental, consequential and contingent damages or 
any kind of nature, including, without limitation: damages to persons or property, whether a claim for such 
damages is based upon warranty, contract, tort or otherwise; damages to persons or property, whether a 
claim for such damages is based upon warranty, contract, tort or otherwise; damages due to or arising 
out of the loss of date; or lost of profits. Tractive Technology, LLC shall not be responsible for any 
damages caused by the presence of error or omission in any of its manuals, instructions or related 
materials. 

 

Tractive Technology, LLC 

Attn: Warranty Claims 

P.O. Box 93562 

Phoenix, AX  85070-3562

 

 

Содержание AUTO-BLiP













Отзывы: