Traction Hobby B-G550, Инструкция по эксплуатации

Страница: 8 / 23

4WD Transfer Case
Shifting Servo State
4WD Transfer Case State
FWD Transfer Case
Shifting Servo State
FWD Transfer Case State
RWD Transfer Case
Shifting Servo State
RWD Transfer Case State
Operating the Diff Lock:
1.The front and rear differential locks of B-G550 are controlled by five channels and six channels
respectively.
2.In most driving environments, the differential can be locked or unlocked at any time. If the speed
difference between the left and right tires is too large, first release the throttle to reduce the wheel speed
difference and then lock the differential. The B-G550 performs best when the front and rear differentials are
unlocked in most cases. This gives the B-G550 the best steering performance and the smallest turning
radius, while also reducing the pressure on the driving components. If the opened differential causes you
to lose grip on loose terrain or prevents you from passing obstacles, you can use the differential lock
switch to lock the corresponding differential.
3.When locking the front differential lock or locking the front and rear differential locks, the high-speed
control and steering accuracy will be limited. The function of locking the differential can be used in any
situation, but when driving at high speeds, unlock the differential can greatly increase the vehicle
maneuverability.
Front Diff Lock servo state
Front Diff Unlock servo state
Rear Diff Lock servo state
Rear Diff Unlock servo state
2.If you replace a new servo or transmitter, the channel switch of the remote control must be in three-way
please adjust the servo parameters according to the state shown in the figure, mainly by adjusting the EPA
parameters of the corresponding channel of the remote control to ensure that the servo is smooth in the
working state.The servo will be damaged due to long-term force.