Tracmaster SP8E, Руководство по эксплуатации

Страница: 16 / 24

SP8E Log Splitter
Page 16
SP8E/0612
Adjustment of wedge stroke
To save time, a system has been designed that makes it possible to adjust wedge stroke so that
this can be set for short logs. In this way, the wedge travels for the distance required only.
After checking the length of the longest logs to be split, regulate wedge stroke as follows:
8QVFUHZWKHEXWWHUÀ\VFUHZRIWKHDGMXVWHUV\VWHP¿JSDJHZLWKRXWUHPRYLQJLW
Start the Log Splitter and bring the wedge to the position required. Release one of machine
control levers so that the wedge does not return but stops in the position you have chosen.
With your other hand, tighten the screw.
The Log Splitter will now re-locate in the point you have set.
Moving the Log Splitter
7RPRYHWKH/RJ6SOLWWHUDURXQGOLIWLWXVLQJWKHDSSURSULDWHKDQGOHQR¿JSDJHDQGSXOO
RUSXVKLWDORQJRQLWVZKHHOV¿JSDJH
$VVHPEO\DQGXVHRIZD\ZHGJHRSWLRQDODQGVOLSRQZHGJHRSWLRQDO
The CAMON SP8E Log Splitter can be equipped with a 4-way-wedge, to split a trunk into four logs
with a single stroke, or with a slip-on-wedge, to reduce working time.
7KHZD\ZHGJH¿JSDJHRUWKHVOLSRQZHGJHPXVWEHDVVHPEOHGGLUHFWO\RQWKH
standard 2-way-wedge.
3RVLWLRQWKHDGGLWLRQDOZHGJHDQGIDVWHQLWLQSODFHE\WLJKWHQLQJWKHEXWWHUÀ\VFUHZRQWKHEDFN
side of the wedge) which must engage in hole in the 2-way-wedge.
The 4-way-wedge is used in the same way as the 2-way wedge taking care, however, not to split
very hard wood or wood with a large number of knots as the use of 2 wedges instead of one
causes greater stress on the wedge.
The slip-on-wedge should be used when not too hard wood has to be split.
WARNING: NEVER USE THE 4-WAY-WEDGE OR THE SLIP-ON-WEDGE
IF IT HAS NOT BEEN SECURED INTO POSITION WITH THE BUTTERFLY
SCREW SUPPLIED, AS THIS COULD PROVE VERY DANGEROUS FOR
BOTH THE OPERATOR AND THE MACHINE.
Use
!