CAMON TC07 Turf Cutter
Page 18
TC07 Turf Cutter
8.0
Transportation, Storage and Handling
8.1
Transportation
Use ramps where possible to manoeuvre the TC07 Turf Cutter into a transportation
vehicle.
The TC07 Turf Cutter must be fixed securely using straps and by placing chocks
behind the wheels.
Always transport the TC07 Turf Cutter horizontally and not tilted at an angle.
Ensure that the fuel control lever on the engine is moved into the OFF position so
fuel does not leak into the carburetor during transportation.
8.2 Storage
Always allow the engine to cool down prior to storage.
Always clean the machine and dry thoroughly prior to storage and ensure all
lubrication points have been re-greased.
For periods of long storage, change the engine oil.
Either drain the fuel completely or fill the fuel tank and add fuel stabilizer.
Do not store the TC07 Turf Cutter in wet rooms, where fertiliser is stored, or in
stables as heavy corrosion may occur.
Always store the machine in a horizontal position.
8.3 Handling
Do not attempt to lift the machine alone. At least two people is the minimum
required.
Gloves must be worn when lifting the TC07 Turf Cutter.
Do not tilt the machine so that fuel can leak into the air filter of the engine.
When performing maintenance on the TC07 Turf Cutter when it is situated on a
work bench, ensure that the machine is firmly held in position at all times.
Do not lift the machine solely by the engine at any point.
