TRCSON USER MANUAL
Page 13 of 19
what happens around the tracker. There is no voice indication that the call is in progress
Note
: (1)X=1, voice monitoring status. After send successfully, the gps tracker will reply: SET PROFILE OK
，
CURRENT PROFILE
：
SILENT.
TRCSON will turn off it’s receiver.
The authorized 3 phone numbers can make a silence call to TRCSON.
(2) X=0,normal status. After send successfully, the gps tracker will reply: SET PROFILE OK
，
CURRENT PROFILE
：
NORMAL. The
TRCSON’s receiver is on, the authorized 3 phone numbers can call in and call out.
Example
:0010000
Set Single Geo-fence Alarm: The first
method
003****E/Wdddmm.mmmmN/Sdd.m
mmmRzzz.z
0030000E11406.0024N2233.4230R0.5
When the tracker moves out of a preset square scope, it will send an SMS alarm to the authorized phone number for SOS.
Remarks:(1) E represents East Longitude, W represents West Longitude; N Represents North Latitude, S Represents South Latitude.
Edddmm.mmmm is the Longitude in the unit of degree and minute (ddd is the degree, mm.mmmm is the minute) (Accuracy for 4 after the
decimal point, the following zero cannot omit).Ndddmm.mmmm is the Latitude in the unit of degree and minute (ddd is the degree, mm.mmmm is
the minute)(Accuracy for 4 after the decimal point, the following zero cannot omit).
(2) zzz.z is the radius from 0.1KM to 999.9KM, If the decimal point of Rzzz.z is 0, you cannot omit the 0. For example,radius is 1KM, you need
to send 0050000R1.0
(3) After set successfully, the TRCSON will reply: SET GEO-FENCE
OK
Example:
0030000E11406.0024N2233.4230R0.5
Set Single Geo-fence Alarm: The
005****Rzzz.z
0050000R0.1
second method
Remarks:(1) zzz.z is the radius from 0.1KM to 999.9KM
(2) After receiving this command, gps tracker will read the present location immediately,
If the Location is valid data:Fix:A(please refer to
4.2 Tracking
for details), the gps tracker will use the present location as center,
and value of Rzzz.z as radius; If gps tracker is in or out of this area, you will receive sms alert.
If the location is invalid during 50 seconds, the gps tracker will reply:ERROR GPS DATA,
TRY AGAIN LATER
(3) If the decimal point of Rzzz.z is 0, you cannot omit the 0. For example,radius is 1KM, you need to send 0050000R1.0
Turn on/off Single geo-fence alarm
(Default:OFF)
211****
210****
2110000
2100000
Remarks:The default geo fence is Turn on
(1) 211****: Turn on single geo-fence alarm
When the GPS tracker is in/out of the preset square, TRCSON will send sms alert and location coordinates to the first authorize phone
number, Meanwhile, TRCSON will call the first authorized phone number first; if failed, then call the second authorized phone number; if failed
once again, then call the third authorized phone number.
(2) 210****: Turn off single geo-fence alarm
Set multiple geo-fence alarm
006****GX,Y,E/W+Longitude
Left+N/S+Latitude
Upper,
E/W
0060000G1,IO,E114.10004N22.55705,E115.10006N23.5
5706
