Enduro Plus CDMA User Manual
For More Information: Please contact TrackingTheWorld, 1633 Bayshore Highway, Suite 390, Burlingame, CA. 94010, USA
Phone: +1.650.692.8100 – Email:
– Website:
www.trackingtheworld.com
Copyright © TrackingTheWorld. All rights reserved. Information in this publication supersedes that in all previously published material. Specification and price
change privileges reserved. All trade names referenced are the service marks, trademarks, or registered trademarks of their respective companies.
TTW-EnduroPlusCDMA-UM001
- 11 -
3.3.
ENDURO PLUS CDMA External Cable Interface
ENDURO PLUS CDMA External Cable is a cable with a Mini USB connector and six wires which
include the external power interface, ignition detect and input interface for ENDURO PLUS
CDMA. Please find the detail description in following table.
Color
Name
Remark
RED
External DC IN (5V)
Please refer to 2.4.1 for detail
Black
Ground
Please refer to 2.4.1 for detail
Blue
External Battery IN (DC 3.4V to 4.2V)
Please refer to 2.4.2 for detail
White
Ignition Detect
Please refer to 2.5for detail
Green
NSW
（
negative trigger input
）
Please refer to 2.6 for detail
3.4.
Turn on/Turn off
Turn on:
Method 1: Press the Power key at least 3 seconds and release it to turn on ENDURO PLUS CDMA.
At the same time, PWR LED will light on.
Method 2: Connect device to charger or external battery, and it will turn on automatically, PWR
LED will light on.
Turn off:
Method 1: Press the power key about 2 seconds; PWR LED will fast flash and then turn off, it
indicates that ENDURO PLUS CDMA is turned off. The time of power off is depended on the
quality of network. The maximum time of power off is 90 seconds. It is only valid to turn off
when using internal battery. Please note the end-user can not power off ENDURO PLUS CDMA
when the power key is disabled by protocol.
Method 2: If using external battery, device will power turn-off when external battery disconnect.
