AVL-75 User Manual
For More Information: Please contact TrackingTheWorld, 1633 Bayshore Highway, Suite 390, Burlingame, CA. 94010, USA
Phone: +1.650.692.8100 – Email:
– Website:
www.trackingtheworld.com
Copyright © TrackingTheWorld. All rights reserved. Information in this publication supersedes that in all previously published material. Specification and price
change privileges reserved. All trade names referenced are the service marks, trademarks, or registered trademarks of their respective companies.
TTW-AVL75-UM001
- 11 -
Step 4: Turn over the device and tighten the screw with screw cushion.
Step 5: Connect the device to extend cable. Or cut off the 8Pin Molex connector.
3.2.
Switch on the Device
The method to power on AVL-75:
- Use external power to turn on.
When the external power is removed, AVL-75 will switch to internal backup battery and keep on
running. When internal backup battery is exhausted, AVL-75 will give a report and then turn off.
3.3.
Power Connection
The red wire is power wire and the black wire is ground wire. The input voltage range for this device is
from 8V to 32V. The device is designed to be installed in vehicles that operate on 12V or 24V systems
without the need for external transformers.
Figure 2.
Typical Power Connection
