•
SOS Notification
To send an SOS notification press and hold the bottom button
(3)
, you will see the SOS on the display.
•
Pedometer
•
Press the top button
(1)
to open the pedometer menu. Press and hold down the bottom button
(3)
to clear
the history in the pedometer menu. Press the upper button
(1)
to return to standby mode.
•
Resetting the device
To reset the device, press the reset buttom
(2)
located between
(1)
and
(3)
buttons.
Before first use of Trackimo Watch
Place the device in an open space that does not interfere with GSM / GPS connections for approximately 15
minutes. This process is required to properly calibrate the GPS location module.
After proper calibration, the device will be able to locate itself via GPS within seconds when entering open space.
Now you are ready to activate your device.
How to activate Trackimo Watch ?
First you will need to create an account on the Trackimo platform. To do this, go to the
trackimo.pl
website and then
in the upper left corner of the page click the "
Register
" button. Enter the email address, set the appropriate
password (
from 6 to 10 characters
), enter the phone number if you want to receive SMS notifications
(not required
).
After entering all the necessary information, confirm the registration by clicking again on "
Register
".
At the e-mail address provided in the registration process you will receive a confirmation message on the Trackimo
platform, to activate your account open the message and click on the "
click here
" button. Now you can log in to your
Trackimo account at
trackimo.pl
by selecting "
Login
" in the top left corner.
Note:
do not forget to check the SPAM folder if there is no message in the main mail folder.
Now you are ready to activate your device.
To do this after logging in to your Trackimo account via trackimo.pl, in the upper left corner click on the
"+ Add
Device
" button, in the new window enter the device ID number and the last 4 digits of the IMEI number. The device
ID and IMEI number can be found on the sticker on the back of the and on its packaging. When adding a device you
can freely name or tag it to make it easier to recognize it on the device list,
if you wont change it’ll be named
by
defaut as its ID numer, you can change in later in the device settings.
Subscription renewal
When the subscription period ends on the device, it will no longer be possible to change device settings, check
history or share it. The device settings menu will be replaced with the new "
Renew subscription
" button.
