NVR User
’
s Manual
41
8. Device List
After the device search, the NVR will list the IP cameras installed in the
same LAN that meet the searching criteria in the Device List. Users can
check the brief information of the found IP cameras in Device List, such as
MAC address, IP address, model type, username/password, etc.
Under Device List, <Details> and <Large Icons> are provided for users to
switch views. Select <Details>, and the information of the IP cameras will
be listed in columns and users can view the preview of the IP camera.
Select <Large Icons>, and users can check and view the brief information
of the IP cameras and its preview. Note that when the preview grid of an
IP camera shows
“
Not Supported
”
or
“
No Snapshot
”
, this suggests the IP
camera does not support this function.
When an IP camera is directly connected via PoE port,
“
(PoE0
N
)
”
will be
added to the end of the Site Name, e.g.
“
MegaPixelCamera
(PoE03)
”
,
which means this IP camera is connected via the third PoE port.
