130
Diagnostic Trouble
Codes (DTC)
If a related chassis component fails or an out-of-tolerance
signal is detected by the ECM, a diagnostic trouble code
(DTC) will be generated in the ECM and displayed on
the LCD. The DTC will be displayed alternately with a
wrench icon or malfunction indicator light (MIL). The
DTC will continue to flash, until the malfunction is cor-
rected and the code cleared.
Code List
NOTE: Each of the following numerical codes will
have a one-letter prefix of C, P, or U. A “C” prefix
denotes a chassis malfunction, a “P” prefix denotes a
power train malfunction, and a “U” prefix denotes a
loss of communication with the gauge.
NOTE: Normal malfunction codes are cleared from
the LCD when the component is replaced or the mal-
function is corrected; however, intermittent codes
must be cleared as noted in the code chart.
NOTE: Low system voltage, loose connections and/
or insufficient cranking speed of the engine can cause
codes P0370, P0371, P0372, P0373, and P0374.
NOTE: If there are several random codes being dis-
played, check the wire harness/connectors.
NOTE: For Electronic Power Steering (EPS) Diag-
nostic Trouble Codes (DTC) see the Electronic Power
Steering Section.
Display
Fault Description
Possible Cause
Fault Recovery Method
C0063
Tilt Sensor Circuit High
Sensor or interconnect harness shorted to battery power.
Correct condition*
C0064
Tilt Sensor Circuit Low/SG/Open
Sensor or interconnect harness open or shorted to chassis ground. Correct condition*
C1263
Backup/Reverse Circuit Open
The backup/reverse relay has been disconnected or its
interconnect harness is open.
Correct condition*
C1264
Backup/Reverse Buzzer Circuit High
The backup/reverse relay or its interconnect harness is shorted to
battery power.
Correct condition*
C1265
Backup/Reverse Circuit Low/SG
The backup/reverse relay or its interconnect harness is shorted to
chassis ground.
Correct condition*
C1400
Fuel Level Sensor Circuit Open
The fuel level sensor or interconnect harness is open.
Correct condition*
P0030
Oxygen Heater Intermittent/Open
The oxygen heater or its interconnect harness is intermittent or
open.
Correct condition*
P0031
Oxygen Heater Low/SG
The oxygen heater or its interconnect harness is shorted to chassis
ground.
Correct condition*
P0032
Oxygen Heater High/SP
The oxygen heater or its interconnect harness is shorted to battery
power.
Correct condition*
P0068
Throttle Position Sensor MAP Plausibility Check for a vacuum leak or a plugged air filter.
Correct condition*
P0107
MAP Sensor Circuit Low/SG/Open
The MAP sensor or its interconnect harness is shorted to chassis
ground.
Correct condition*
P0108
MAP Sensor Circuit High/SP
The MAP sensor or its interconnect harness is shorted to battery
power.
Correct condition*
P0112
Intake Air Temp Sensor Circuit Low/SG
The intake air temperature sensor or its interconnect harness is
shorted to chassis ground.
Correct condition*
P0113
Intake Air Temp Sensor Circuit High/Open The intake air temperature sensor or its interconnect harness is
open or shorted to battery power.
Correct condition*
P0114
Intake Air Temp Sensor Circuit
Intermittent
The intake air temperature sensor or its interconnect harness is
intermittent.
Correct condition*
P0116
Engine Coolant Temp Sensor Circuit
Range/Performance
The engine coolant temperature sensor is producing an out-of-
range voltage.
Correct condition*
P0117
Engine Coolant Temp Sensor Circuit
Low/SG
The engine coolant temperature sensor or its interconnect harness
is shorted to chassis ground.
Correct condition*
P0118
Engine Coolant Temp Sensor Circuit
High/Open/SP
The engine coolant temperature sensor or its interconnect harness
is open or shorted to battery power.
Correct condition*
P0122
Throttle Position Sensor #1 Circuit
Low/SG
The throttle position sensor or its interconnect harness is shorted to
chassis ground.
Correct condition*
P0123
Throttle Position Sensor #1 Circuit
High/Open
The throttle position sensor or its interconnect harness is open or
shorted to battery power.
Correct condition*
P0130
Oxygen Sensor Intermittent/Open
The oxygen sensor or its interconnect harness is intermittent or
open.
Correct condition*
P0131
Oxygen Sensor Low/SG or Air-Leak
The oxygen sensor or its interconnect harness is shorted to chassis
ground or an air leak exists.
Correct condition*
P0132
Oxygen Sensor High/SP
The oxygen sensor or its interconnect harness is shorted to battery
power.
Correct condition*
P0171
Oxygen Feedback Below Minimum
Correction
Low fuel rail pressure, dirty fuel filter, or dirty injectors.
Correct condition*
P0172
Oxygen Feedback Exceeds Maximum
Correction
Excessive fuel rail pressure, MAP or temp sensors out of spec.
Correct condition*
P0201
Cylinder #1 Fuel Injector Circuit Open
Injector #1 has been disconnected or its interconnect harness is
open.
Correct condition**
Содержание 800SX
