Tracer Tumba BT 2.1, Руководство пользователя

Страница: 4 / 12

4
User’s manual
EN
5-in-1 music set
2.1 Tracer Tumba BT
NOTE
Correctly plug the power cord into a power outlet to
prevent the risk of electric shock. Make sure to read his
operating manual and keep it for future reference to make
sure the product is operated correctly.
SAFETY
• Do not insert any items into the system.
• Do not place the system in humid environments and
protect it against humidity and dust (do not place any
vases or other items on the system).
• Protect the system against overheating (do not place the
system near sources of heat and protect it against direct
sunlight).
• Do not clean the system with petrol, alcohol or solvents.
These agents may damage the surface. Use soft dry
cloth for cleaning.
• Protect diffusers against mechanical impact.
• Do not attempt to repair the device yourself in order to
prevent the risk of electric shock and other accidents.
• If the system is out of order, unplug the power cord and
return it for repair.
Product description
1. Left Speaker
2. Subwoofer
3. Right Speaker
4. LED Display
5. Volume Control Key
6. Treble Control Key
7. Bass Control Key
8. Echo Control Key
9. MIC VOL Control Key
10. MIC1
11. MIC2
12. LED lamp
13. Equalizer button
14. Next button
15. Search and playback button
16. Previous button
17. Mode button
18. USB flash drive slot
19. SD/MMC card slot
Press “MODE” to change the mode setting.
• Bluetooth
• USB flash drive
• SD/MMC card
• FM Radio
Sequence of changes (MODE): Bluetooth-> Audio Line-
in-> MP3-> FM radio
If USB port and SD/MMC card are used simultaneously,
the device will play back tracks via the USB port.
Pairing Bluetooth-compatible devices:
The device you want to pair with needs to support the
A2DP Bluetooth profile.
1. Make sure that the Bluetooth mode has been activated
on your device and Tracer Tumba.
2. The LED light flashes red and blue if your device is
ready to pair.
3. On your device, select “Tracer Tumba” from the list of
devices that can be paired.
4. If the pairing is successful, the LED light will turn solid
blue. An acoustic signal will sound to confirm that the
pairing has been done.
5. If no device is paired within 2 minutes, the device will
switch back to automatic pairing mode.
6. You do not have to pair with your mobile phone every
time you switch into Bluetooth mode. The device will
auto-connect to the last device it was paired with. If
the pairing fails, switch off and on the loudspeaker and
restart the Bluetooth device.
7. To connect to another device, unpair the device that you
are paired to and continue from step 3.
MP3 mode
1. Connect the device to USB port
2. The LED light will signal that the device was connected
to USB port.
3. Playback starts automatically. If you have multiple
tracks on the disk, they will be played one after another.
4. Press + or – (remote) to set the volume
5. Press << or >> to change the track
FM mode
Switch the device into FM mode
To preset radio stations, press and hold “Search” button.
The device will automatically search and set the available
FM stations. The presetting depends on the signal levels
of radio stations available and the interference at the
given location.
Press >> or << to change the radio station.
Press + or – (remote) to set the volume
Sound adjustments
ROCK,JAZZ,CLASSIC,COUNTRY ( button no. 13) are
only available in USB and SD/MMC modes.
Compatible microphones
Dynamic microphone, mono type connector, output
impedance at least 600 Ohm.