Tracer Ring LED lamp 26 cm with mini tripod
Instruction manual
EN
Please read and retain for future reference the following carefully
to ensure the satisfactory and safe operation of the light.
Caution: This appliance is for domestic use only. Do not operate in
packaging. Do not allow any part to come into contact with excessive
heat or naked flame. This product is not a toy. Keep pets away from
this light and ensure that children are supervised and do not play
with it. This appliance is not intended for use by persons (including
young children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person
responsible for their safety.
Do not expose appliance to damp and moisture. Cable must be
positioned so it is not a tripping or entanglement hazard. Unplug the
power supply
when not in use. Do not use the appliance if it is damaged.
The lamp requires a 5V DC power supply with an intensity of min. 500mA
(possibility of connecting to the computer USB port). However the full power
is achieved when connected to the 5V / 3A power supply.
* Fits most Smartphones, Smartphone NOT INCLUDED. Images for illustration
purposes only, colors and contents may vary. Sizes are approximate. Uses LED
non-replaceable bulbs.
CONTENTS
Ring light
Tripod
Phone
holder
Pan/tilt
adjuster
USB cable & control
Assembly
Unfold all three legs from tripod
and place on a level surface
Screw the pan/tilt adjuster onto
the top of the tripod
Screw the ring light onto the base
until it is tight.
Screw the goose neck phone holder
onto the ring light
Pull the right side of the clip to the
size of your phone
Use the controller to turn on/off
change light modes and brightness levels
Brightness up
Warm/cool
light
Brightness down
ON/OFF Switch
Supply voltage: 5V DC
Power: 10 W
LED type and qty: Non-replaceable light source 2835 SMD x 120 pcs. diodes
Lumens: 600-1300 lm
Color temperature: 2700-7000k
Lamp current: max. 3A
Beam angle: 120°
Working temperature: 55°
CRI: RA>80
Starting time: <2s
Stareting time up to 60%power: <1s
Stareting time up to 95%power: <2s
Product's life time: 5000h
Recommended switch on-off times: 50 000
Lamp dimensions:outer 26 cm, inner 20 cm
Tyripod height: 9 cm
Net weight: 435 g
Material: carbon steel / aluminum alloy / ABS plastic
