Tracer Rayder 4in1, Инструкция по эксплуатации

Страница: 10 / 38

10
Instructions for use
EN
Steering wheel
Rayder 4in1
Clear all programs
1. Press SHARE/9/View +OPTIONS/10/Menu. Hold for 3 seconds until the Orange LED
is on,
2. Press OPTIONS/10/Menu and hold for 4 seconds. Red LED solid light . All of the pro -
grammed buttons are cleared. Default is restored
Note: All of the settings will be cleared when the wheel is power off
Program Pedals as Y axis
1. Press SHARE/9/View +OPTIONS/10/Menu. Hold for 3 seconds until the Orange LED
is on.
2. Press LEFT of the D-PAD. The RED LED is on. Pedals are programmed as Y function.
3 levels wheel sensitivity adjustment
1. Press SHARE/9/View +OPTIONS/10/Menu . Hold for 3 seconds until the Orange LED is
on,
2. Press SHARE/9/View Buttons, to indicate current sensitivity status,
3. Press SHARE/9/ View Buttons, to adjust sensitivity levels in this circulation as follows:
Medium (Orange LED flash), High (Orange LED flash quickly), LOW (Orange LED
Flash slowly)
4. Press UP, to enter sensitivity.
Pedal as analog function:
The harder you press the pedal, the bigger data and higher flashing frequency.
Platforms:
For use with PS3
1. Connect the wheel to PS3 console; And connect the pedal to the wheel, Power on PS3
console.
2. The active channel LED indicator will light up when connection finished automatically.
3. Then you can set up or start the game
4. During PS3 game play, press the HOME button once to enter the XBM window; Press and
hold the HOME button for 2 seconds to enter MENU setup window
For use with PS4
1. Connect the wheel to PS4 console; And connect the pedal to the wheel, Power on PS4
console
2. Connect the racing wheel to original PS4 controller by a USB cable, consider the controller
as a key to establish the connection between the controller and racing wheel( The controller
need to be power off)
3. After the connection been established, the RED LED is on, Press the Wheel HOME button,
then you can start the game or the settings
4. During PS4 game play, press the HOME button once to enter the XBM window.
Attention! To connect the PS4 controller to the steering wheel, use a classic 4-core USB cable
(not included), the two-core USB cable for powering portable devices is not suitable for use with
the steering wheel.