Tracer M-ray 914, Руководство пользователя

Страница: 30 / 32

Instructions for use
30
Metal Detector
TRACER M-ray 913 EN
move the coil from side-to-side. Note the
spot where the tone is loudest, and the
sensitivity level is largest (usually incre
-
ments on LCD changes more sensitive
than the sound changes). Then move the
coil toward the ground to zero-in on the
target’s location. A coin-size object will be
detected when the object enters the range
of the inner coil.
CARE AND
MAINTENANCE
The following suggestions will help you
care for your metal detector so you can
enjoy it for years.
Trouble Shootings:
1. Detector emits false signal in field use.
Sensitivity is set too high, please lower
the sensitivity till the false signal dis
-
appears. Move the search coil slowly.
Oxidized metal may cause the false
signal. If the signal is not repeatable
when search coil swept over a target,
the target usually is a trash.
2. LCD displays multiple target catego -
ries or emits several sounds at one
time.
There might be over one kind of metal,
or the detector cannot identify the tar
-
get. Sometimes, oxidized metal also
cause the excursion of target arrow
and tone. Too high sensitivity is an
-
other probable reason.
3. Detector works unstable or read by
mistake.
There might be another metal detec -
tor working or electric line
nearby.
Handle the detector gently
and carefully. Dropping it
can damage circuit boards
and cases and can cause
the detector to work improp
-
erly.
Use the detector only in
normal temperature envi
-
ronments. Temperature ex -
tremes can shorten the life
of electronic devices, dam
-
age the cases of the detector.
Keep the detector away from dust and
dirt, which can cause premature wear
of parts.
Wipe the detector with a damp cloth
occasionally to keep it looking new.
Do not use harsh chemicals, cleaning
solvents, or strong detergents to clean
the detector.
CAUTION :
• The search coil is water proof, and
it can be completely under the fresh
water or sea water. Please be careful
to avoid the water enter into machine
body. Sea water may erode the search
coil. Please always use fresh water to
clean the search coil after detection in
sea water.
• Change or damage the inner compo -
nents will cause the detector fault, and
such fault is not within our warranty.