Tracer 42516, Инструкция по эксплуатации

Страница: 19 / 44

Instructions for use
19
4. Installing the adapter bracket
• To prevent scratching the screen, set a cloth on a fl at, level surface that will support
the weight of the display.
• Place the display on its screen, put the adapter bracket on the back of the display
and align it with the holes as shown in fi g. 4.1.
• Attach the adapter bracket to the back of the display, using the appropriate washers
and screws as shown in fi g. 4.2.
• Install the other adapter bracket in the same way.
5. Installing the displays
Warning: At least two quali fi ed persons are required for this operation.
• With the help of a second person, simultaneously hook the two displays with adapter
brackets onto the two plates of the horizontal support assembly as shown in fi g 5.1.
• Secure the displays with four screws using a 3mm Allen key as shown in fi g.5.1. Do
not overt tighten!
Important: Do not let go of the displays until you have made sure they are correctly
mounted and the safety screws are tightened.
6. Adjusting the position of the bracket assembly
Loosen the screws with the appropriate screwdriver. Slide the bracket assembly to
the desired position and tighten the screws to lock the bracket assembly in place as
shown in
fi g. 6.1.
fig. 3.2 fig. 3.1
For VESA 100X100 For VESA 75X75
M-A/M-B
M-C/M-D
fi g. 4.1
VESA 100 X 100 brackets VESA 75 X 75 brackets
fi g. 4.2