Tracer 4.5D FHD Vela, Инструкция по эксплуатации

Страница: 7 / 25

Instruction
manual
7
EN
Tracer 4.5D FHD Vela
Installation guide
1. Turn off the car engine.
2. Insert the TF card into the recorder card slot. Please use high-speed TF card
(Class10 or higher), the capacity 8-32GBFix the recorder to the suction cup
bracket on the glass of the car.
3. Insert the car charger into the car cigarette lighter.
4. Using enclosed mounting elements please put the mirror dash cam on the front
mirror inside the car.
5. Adjust the lens position to ensure that the lens is level with the ground. Plug in
the rear cam to the propper slot on the dash cam. For automatic switch to the
image from the rear camera, after using reverse gear, please connect the red
cable from the rear camera extension cord to the + 12V terminal on the reverse
lamp bulb. It is recommended that you use the services of a qualified workshop.
6. Connect the USB port to the car charger with a charging extension cable. The
wiring extension cable can be laid along the edge of the windshield of the car
during wiring.
7. Start the engine and check that the machine is installed correctly. When the
machine is installed correctly, the system work indicator lights up; the machine
starts to enter the recording state, and the recording indicator flashes. Please
check if the picture on the display is normal.
Function introduction
1. Motion Detection: in standby, detect object is moving front of camera, camera
will record video automatically, press OK button to stop and turn off the function
2. Loop recording: to select video time in 1/3/5 minutes, it will delete the first file
automatically to keep recording
3. G-sensor: It is one of the most important functions of a car camera. It is a sen -
sor that evaluates all the forces that act on the car while driving and maneuve -
ring on the road, and as a result of road incidents. In a situation where the forces
detected by the sensor are higher than those in normal use, sensor sends a
signal to the camera and blocks the recorded video from being deleted. For
example, in the event of a collision by another car, or a collision while parking,
the G-Sensor’s response automatically saves and blocks the recording. Thanks
to this function, we have irrefutable evidence of who was at fault on the road and
what were the circumstances of the event, and thus may be used as possible
evidence in a case for compensation or proving guilt.
4. Parking mode: turn on Parking mode in menu. Than in standby mode, once
camera detect any impact, it will turn on automatically, record and secure the
video.