TRACEABLE
THERMOMETER
WITH
TIME/DATE
MAX/MIN
MEMORY
INSTRUCTIONS
®
BENCH STAND
The unit is supplied with a bench stand that is a
part of the battery cover. To use the bench stand,
locate the small opening at the bottom of the unit.
3ODFH\RXU¿QJHUQDLOLQWRWKHRSHQLQJDQGÀLSWKH
stand up. To close the stand, simply snap it shut.
WALL MOUNTING THE UNIT
6HWWZRVFUHZVLQWRWKHZDOODWWKHGHVLUHGORFDWLRQ
'RQRWVHWWKHVFUHZÀXVKWRWKHZDOOWKHKHDGVRI
the screws will need to slip into the receptacles on
the back of the unit. Once the screws have been
properly set, hang the unit in place by sliding the
receptacles on the back of the unit over the heads
of the screws.
ALL OPERATIONAL DIFFICULTIES
If this unit does not function properly for any
reason, replace the battery with a new high quality
battery (see “Battery Replacement” section). Low
battery power can occasionally cause any number
RI³DSSDUHQW´RSHUDWLRQDOGLI¿FXOWLHV5HSODFLQJ
the battery with a new fresh battery will solve most
GLI¿FXOWLHV
BATTERY REPLACEMENT
Erratic readings, faint readings, or no display are
all indications that the battery must be replaced.
Remove the battery cover. Remove the exhausted
battery and replace with a new AAA alkaline bat-
tery. Replace the battery cover making certain to
run the probe cable through the slot on the right or
left bottom side of the battery cover. Upon initial
installation of the battery, the time and date will
UHTXLUHVHWWLQJ6HHWKH³2SHUDWLRQ´VHFWLRQ
www.
GlobalTestSupply
.com
Find Quality Products Online at:
