6
3.0 Care and Maintenance
3.1 General
The AquaSafe® incubator is designed to require minimal maintenance if used correctly and the
instructions herein are adhered to, although from time to time cleaning will be required as outlined
in section 4.2.
If the equipment is used in a manner not specified by the manufacturer, the protection provided by
the equipment may be impaired.
3.2 Cleaning
Before cleaning the incubator, ensure that the power supply is disconnected, the incubator is turned
off and has cooled down.
After cleaning, ensure all parts are thoroughly dried prior to operation.
To clean the incubator outer surfaces and plastics use a cloth moistened with a mild soap solution or
an alcohol impregnated cloth or wipe. Do not use acetone or other solvents.
The incubator is splash proof but it is not fully waterproof so it should not be left outside in wet
conditions and must not be submersed in water.
The rack can be steam sterilised if required.
4.0 Technical Specification
User Interface
Display
16 x 1 LCD
Keypad
3 key, tactile chemical resistant keypad
Power supply
Input (Max)
12-28V DC, 24W ( via supplied Power supply unit vehicle charging
lead or docking station only)
Environmental
Operating temperature
range
5 – 40 °C
Storage temperature
0 – 70°C
