background image

 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 

 

NOTE: 

Note means any additional information pertaining 

to the product or its proper usage. 
 
The following safety precautions must be followed at all 
times: 
 
1. Read all manuals included with this product carefully. 
Be thoroughly familiar with the controls and the proper 
use of the equipment. Only persons well acquainted with 
these rules of safe operation should be allowed to use the 
winch. 
 

   

Always unplug the wiring harness to prevent 
accidental starting before attempting to install, 
service, relocate or perform maintenance.

 

 
2. Never use the winch to lift or move people or animals. 
3. Stand away from the winch when in use and keep 
children away from winch area at all times. 
 

   

Always stand clear of the area behind and 
between the load or anchor point and the winch. 
Serious injury could occur, if the cable breaks. 

 
4. Always keep hands clear of cable spool (drum area). 
5. Do not wear loose fitting clothing, scarves, or neck ties. 
Loose clothing may become caught in moving parts and 
result in serious personal injury. 
6. Never use the winch for overhead lifting. 
7. Always wire the winch with circuit breakers. Failure to 
use the breakers could cause overheating, thus creating a 
potential fire hazard or motor damage. 
 

   

Always leave a minimum of five wraps of cable 
on the drum at the bottom layer to achieve a 
rated load.

 

8. Inspect the cable for weak or worn condition, or 
kinking (short tight twist or curl) before each use. 
9. When replacing the cable, always use a Trailer winch

 

cable with the rating and cable strength. 
10. Never substitute rope for cable. Possible injury could 
occur. 
11. Do not attempt to pull a load greater than the rated 
load of the winch. 
12. Do not use the winch to solely hold or support the 
boat. When the boat is on the trailer, secure the boat 
with tie-downs. Always use tie-down straps to hold the 
boat to the trailer. Damage could occur to the winch or 
the boat if boat-to-trailer tie-down straps are not used.   
13. Never wrap the winch cable around the load. Use 
suitable chain to prevent the cable from kinking or 
fraying. 
14. Always wear leather gloves when handling the 
cable.    Steel cable can cause hand injuries. 
 

   

After using the winch, always disconnect the 
power cord from the socket to avoid moisture 
collection in the socket and prevent the 
possibility of short circuiting. 

 
15. Do not operate the winch under the influence of 
drugs, alcohol, or other medication. 
 

   

Do not use the winch to solely secure boat to 
trailer during transit. Use separate tie-down 
straps to secure the boat to the trailer. 
 

Содержание Day Runner












Отзывы: