
Printed in the Federal Republic of Germany
TR-Electronic GmbH 2014, All Rights Reserved
05/04/2018
TR - ELA - BA - DGB - 0023 - 06
Page 143 of 183
7.4.3.14 Attribute 25, Velocity Format
Velocity Format
defines the output unit of “Attribute 24, Velocity Value”. The
setting is carried out for all installed magnets.
ENGUNIT
Value
Unit
Default
0x1F04
steps per second [stp/s]
0x2B00
meter per second [m/s]
0x2B01
centimeter per second [cm/s]
X
Connection path,
Packed EPATH
with 8 bit class
0x20
0x23
0x24
0x01
0x30
0x19
Logical Type
= Class
Class #23
Logical Type
= Instance
Instance #1
Logical Type
=Attr.-ID
Attr.-ID #25
To save this attribute permanently the attribute 112
Accept Parameter
or service
code 0x16
save
must be executed.
7.4.3.15 Attribute 26, Velocity Resolution
Velocity Resolution
defines the resolution of “Attribute 24, Velocity Value” and
refers to the adjusted unit in Attribute 25, Velocity Format. The setting is carried out for
all installed magnets.
Access
Set / Get
Lower limit
1
Upper limit
1000000 [µm/s, if
Velocity Format
= steps/s]
In case of pre-selection
Velocity Format
= m/s or cm/s, the input
has to be interpreted as factor
Default
1
Connection path,
Packed EPATH
with 8 bit class
0x20
0x23
0x24
0x01
0x30
0x1A
Logical Type
= Class
Class #23
Logical Type
= Instance
Instance #1
Logical Type
=Attr.-ID
Attr.-ID #26
To save this attribute permanently the attribute 112
Accept Parameter
or service
code 0x16
save
must be executed.
Example 1
, desired unit: mm/s:
Velocity Format = steps/s (0x1F04)
Velocity Resolution = 1000
Example 2
, desired unit: m/s:
Velocity Format = m/s (0x2B00)
Velocity Resolution = 1