Parameterization
TR-Electronic GmbH 2008, All Rights Reserved
Printed in the Federal Republic of Germany
Page 138 of 155
TR - ECE - BA - DGB - 0073 - 07
06/27/2017
7.8.3.5.2 Set and store the IP parameter
Setting and storage of the IP parameter can be made in two ways by means of the
TCP/IP Interface Object
, Class code 0xF5:
1. If the
Set_Attribute_Single
service is applied to attribute 0x05 the
contents of the
Interface Configuration
will be set as new IP
parameter. If the value of the attribute 0x03
Configuration Control
=
0x00 when this action is performed, the configuration is stored permanently in
the FLASH memory.
2. If the value of attribute 0x03
Configuration Control
= 0x02 and the
measuring system has obtained a configuration via DHCP, the IP parameters
are saved only temporarily. If then the value is set to 0x00 in the
Configuration Control
, the current configuration is stored in the FLASH
memory permanently.
Flowcharts