User's Manual l TQMLS10xxA UM 0105 l © 2022, TQ-Systems GmbH
Page 28
8.
ENVIRONMENT PROTECTION
8.1
RoHS
The TQMLS10xxA is manufactured RoHS compliant.
•
All components and assemblies are RoHS compliant
•
The soldering processes are RoHS compliant
8.2
WEEE
®
The final distributor is responsible for compliance with the WEEE
®
regulation.
Within the scope of the technical possibilities, the TQMLS10xxA was designed to be recyclable and easy to repair.
8.3
REACH
®
The EU-chemical regulation 1907/2006 (REACH
®
regulation) stands for registration, evaluation, certification and restriction of
substances SVHC (Substances of very high concern, e.g., carcinogen, mutagen and/or persistent, bio accumulative and toxic).
Within the scope of this juridical liability, TQ-Systems GmbH meets the information duty within the supply chain with regard to
the SVHC substances, insofar as suppliers inform TQ-Systems GmbH accordingly.
8.4
EuP
The Ecodesign Directive, also Energy using Products (EuP), is applicable to products for the end user with an annual quantity
>200,000. The TQMLS10xxA must therefore always be seen in conjunction with the complete device.
The available standby and sleep modes of the components on the TQMLS10xxA enable compliance with EuP requirements for
the TQMLS10xxA.
8.5
Battery
No batteries are assembled on the TQMLS10xxA.
8.6
Packaging
By environmentally friendly processes, production equipment and products, we contribute to the protection of our
environment. To be able to reuse the TQMLS10xxA, it is produced in such a way (a modular construction) that it can be easily
repaired and disassembled. The energy consumption of this subassembly is minimised by suitable measures. The TQMLS10xxA is
delivered in reusable packaging.
8.7
Other entries
The energy consumption of this subassembly is minimised by suitable measures.
Due to the fact that at the moment there is still no technical equivalent alternative for printed circuit boards with bromine-
containing flame protection (FR-4 material), such printed circuit boards are still used.
No use of PCB containing capacitors and transformers (polychlorinated biphenyls).
These points are an essential part of the following laws:
•
The law to encourage the circular flow economy and assurance of environmentally
acceptable removal of waste as at 27.9.94
(Source of information: BGBl I 1994, 2705)
•
Regulation with respect to the utilization and proof of removal as at 1.9.96
(Source of information: BGBl I 1996, 1382, (1997, 2860))
•
Regulation with respect to the avoidance and utilization of packaging waste as at 21.8.98
(Source of information: BGBl I 1998, 2379)
•
Regulation with respect to the European Waste Directory as at 1.12.01
(Source of information: BGBl I 2001, 3379)
This information is to be seen as notes. Tests or certifications were not carried out in this respect.
