TQ MBa8Xx, Руководство пользователя

Страница: 37 / 65

User's Manual l MBa8Xx UM 0100 l © 2020, TQ-Systems GmbH Page 32
3.8.7 MIPI CSI (continued)
Table 34: Pinout MIPI-CSI (X28)
Pin Signal Dir. Level Remark
1 GND P 0 V
Ground
2 GND P 0 V
3 MIPI_CSI_EN O
PD
1.8 V CSI-Enable (TQMa8Xx: GPIO3_IO07)
4 NC – – Not connected / reserved
5 MIPI_CSI_RST# O
PD
1.8 V Reset (TQMa8Xx: GPIO3_IO08)
6 NC – – Not connected / reserved
7 GPIO1_IO26 I 1.8 V General Purpose Input (e.g. Trigger input)
8 NC – – Not connected / reserved
9 M4_GPIO0_IO03 I 1.8 V General Purpose Input (e.g. Sync input)
10 NC – –
Not connected / reserved 11 NC – –
12 NC – –
13 GND P 0 V
Ground
14 GND P 0 V
15 MIPI_CSI_D3– I 1.8 V CSI interface (Lane 3)
16 NC – – Not connected / reserved
17 MIPI I 1.8 V CSI interface (Lane 3)
18 NC – – Not connected / reserved
19 GND P 0 V
Ground
20 GND P 0 V
21 MIPI_CSI_D2– I 1.8 V CSI interface (Lane 2)
22 NC – – Not connected / reserved
23 MIPI I 1.8 V CSI interface (Lane 2)
24 NC – – Not connected / reserved
25 GND P 0 V
Ground
26 GND P 0 V
27 MIPI_CSI_D1– I 1.8 V CSI interface (Lane 1)
28 NC – – Not connected / reserved
29 MIPI I 1.8 V CSI interface (Lane 1)
30 NC – – Not connected / reserved
31 GND P 0 V
Ground
32 GND P 0 V
33 MIPI_CSI_D0– I 1.8 V CSI interface (Lane 0)
34 NC – – Not connected / reserved
35 MIPI I 1.8 V CSI interface (Lane 0)
36 NC – – Not connected / reserved
37 GND P 0 V
Ground
38 GND P 0 V
39 MIPI_CSI_CLK– I 1.8 V CSI interface (Clock)
40 NC – – Not connected / reserved
41 MIPI_ I 1.8 V CSI interface (Clock)
42 NC – – Not connected / reserved
43 GND P 0 V
Ground
44 GND P 0 V
45 MIPI_CSI_SDA I/O 1.8 V Data for I²C configuration interface (TQMa8Xx: GPIO3_IO06
( 17)
)
46 NC – – Not connected / reserved
47 MIPI_CSI_SCL O 1.8 V Clock for I²C configuration interface (TQMa8Xx: GPIO3_IO05
(17)
)
48 NC – – Not connected / reserved
49 GND P 0 V Ground
50 NC – – Not connected / reserved
51 MIPI_CSI_MCLK O 1.8 V Master clock
52 NC – – Not connected / reserved
53 GND P 0 V
Ground
54 GND P 0 V
55 NC – – Not connected / reserved
56 V_5V_CSI P 5 V 5 V supply (filtered from V_5V), max 0.5 A in total at pins 56, 58, 60
57 NC – – Not connected / reserved
58 V_5V_CSI P 5 V 5 V supply (filtered from V_5V), max 0.5 A in total at pins 56, 58, 60
59 NC – – Not connected / reserved
60 V_5V_CSI P 5 V 5 V supply (filtered from V_5V), max 0.5 A in total at pins 56, 58, 60
17: There are no pull-up resistors on the TQMa8Xx and the MBa8Xx. Additional external pull-ups must be implemented on the CSI adapter if required.