TQ MB-COME10-1, Руководство пользователя

Страница: 13 / 33

User's Manual l MB-COME10-1 UM 0101 l © 2016 TQ-Group Page 7
3.3 Environmental Specification
•
Temperature operating, Extended: –20 °C to +85 °C
•
Temperature storage: –40 °C to +85 °C
•
Relative humidity (operating / storage): 10 % to 90 % (not condensing)
3.4 System Components
3.4.1 Gigabit Ethernet Controller
The MB-COME10-1 is equipped with an Intel® i210IT Ethernet controller with 10/100/1000 Mbps speed and IEEE1588 support.
Please contact
support@tq-group.com for further information about the IEEE1588 support.
3.4.2 DP-LVDS Bridge
The MB-COME10-1 is equipped with an NXP PTN3460IBS eDP to LVDS bridge. If a display is connected to eDP the eDP to LVDS
bridge will be deactivated automatically. There is also an EDID EEPROM on the MB-COME10-1 where display specific data can be
stored.
3.4.3 Dual UART
The MB-COME10-1 is equipped with an EXAR XR28V382 dual UART with its register set is based on the industry standard 16550
UART. The connected serial ports operate with standard serial port drivers.
3.4.4 USB Hub
The MB-COME10-1 is equipped with a Microchip USB2517 with 7 Hi-Speed downstream ports.
3.4.5 HD-Audio Codec
The MB-COME10-1 is equipped with a VIA VT1802P High Definition Audio Codec with a stereo Class D Amplifier with 2 W RMS
output power per channel.
3.4.6 I2C Test Devices
The MB-COME10-1 is equipped with an EEPROM and an I/O Expander at the general purpose I2C bus (COM Express™ pin names
I2C_DAT and I2C_CK) This devices can be used for software development and debug purposes. Further information can be found
in the chapter Software.