User & Installation manual
VHF- Communication Transceiver
Doc.-Nr.:
DE-3000-800100e
KRT2, KRT2M, KRT2RC
Revision 13.0
Jul. 2016
21 / 67
In the identifier window a blinking
cursor will show up under the
extreme left character.
The turning knob selects the desired
character.
The AUD button positions the curser
one character to the right. The DUAL
button positions the cursor one
character
to
the
left
and
simultaneously erases this character.
The station identifier can consist of a
maximum of 8 characters.
To change frequency just press the FREQ button and follow the normal
direct input procedure to edit the frequency
, see “4.3.1 Direct Frequency
”.
To quite the frequency input press the MEMORY button again in order to
go to the station identifier window for editing the identifier if required.
Using the buttons FREQ and MEMORY it is possible at any time to toggle
between identifier and frequency inputs.
Keep in mind the watch dog timer which will terminate the input mode after
20 sec.
Termination and Save
To save the entered identifier, press the
key as the cursor is on the
station name
, “SAVE” will appear and the system will go back to the
favorite selection.
A
sorting process
can be activated by pressing
the “MEM” button again
from the EDIT-mode.
“SORT?” will be displayed for 20 seconds and it should be activated with
or skipped with
“MEM”.