Page
15
of
20
5.5 Error-handling
Error
Cause / source
Solution
No signal given by
Receiver (RX)
Connection between
Transmitter(TX) and
Receiver (RX) may be
interrupted or cannot be set
up properly
1) Check whether LED indication (5) of
field strength continuously lit.
2) Check whether Transmitter (TX) and
Receiver (RX) are paired.
3) Check distance between Transmitter
(TX) and Receiver (RX)
However Transmitter (TX)
and Receiver (RX) are
paired no video data is
transmitted
Cable connection might be
damaged
1) Please check SDI-cable connection.
2) Please check video-signal validity.
Pairing failed
Distance between
Transmitter (TX) and
Receiver (RX) too short.
Vergrößern Sie den Abstand zwischen
Transmitter und Receiver (mindestens
30cm).
Pairing failed
Channel programming
(preset) has been started
with Receiver (RX)
Start pairing with Receiver (RX) and pair
one by one. Simultaneous pairing of
different receiver (RX) is not possible.
Содержание MODUL NO. ONE
Страница 20: ......
