User's Manual l MBLX2160A UM 0101 l © 2022, TQ-Systems GmbH
Page 6
3.1.1
TQMLX2160A mating connectors
The TQMLX2160A is held in the mating connectors on the MBLX2160A by 560 pins on three connectors. The standard board-to-
board distance is 8 mm, but a reduced distance of 5 mm is possible.
Table 2:
TQMLX2160A mating connectors
Manufacturer
Part number
Type
Remark
EPT
401-55401-51
•
120 pin, 0.5 mm pitch
•
Data transfer rate 10+ Gbit/s
Assembled on MBLX2160A
401-55103-51
•
220 pin, 0.5 mm pitch
•
Data transfer rate 16+ Gbit/s
402-51401-51
•
120 pin, 0.5 mm pitch
•
Data transfer rate 10+ Gbit/s
Assembled on TQMLX2160A
402-51101-51
•
220 pin, 0.5 mm pitch
•
Data transfer rate 16+ Gbit/s
To avoid damaging the connectors of the MBLX2160A or the TQMLX2160A while removing the TQMLX2160A, the use of the
extraction tool MOZILX2160A is strongly recommended.
Note: 16 Gbit+ specification
It is strongly recommended to use 220-pin connectors on carrier boards that comply with the
16 Gbit+ specification. For the 120-pin connectors the 10 Gbit+ specification is sufficient.
3.1.2
TQMLX2160A pinout
All available TQMLX2160A signals are routed to three connectors on the MBLX2160A.
More detailed information is to be taken from the TQMLX2160A User’s Manual (4).
The direction of the signals in the following tables are seen from the TQMLX2160A's perspective.
Note: Available interfaces
Depending on the TQMLX2160A derivative not all interfaces are available. Refer to the TQMLX2160A
User’s Manual and the TQMLX2160A pinout table to see which interfaces are available.
When using the processor signals, it is essential to pay attention to the multiple pin assignment by
different CPU functions (multiplexing).
The pin assignments shown in the following tables refer to the MBLX2160A.
