TQ-Systems HPR50, Руководство пользователя

Страница: 3 / 10

EN - 3
1.2 Intended Use
The Drive Unit HPR50 is intended exclusively for assisting power to your
e-bike and must not be used for any other purposes.
Any other use or use that goes beyond this is considered improper and will
result in the loss of the warranty. In case of non-intended use, TQ-Systems
GmbH assumes no liability for any damage that may occur and no warranty
for proper and functional operation of the product.
Intended use also includes observing these instructions and all information
contained therein as well as the information on intended use in the supple-
mentary
documents enclosed with the e-bike.
Faultless and safe operation of the product requires proper transport, storage,
installation and operation.
1.3 Safety instructions for working on the e-bike
Make sure that the HPR50 drive system is no longer supplied with power
before doing any work (e.g. cleaing, chain maintenance, etc.) on the e-bike:
►
Switch off the drive system at the Display and wait until the Display has
disappeared.
Otherwise, there is a risk that the Drive Unit may start in an uncontrolled way
and cause serious injuries, e.g. crushing, pinching or shearing of the hands.
All work such as repair, assembly, service and maintenance be carried out
exclusively by a bicycle dealer authorized by TQ.
1.4 Safety instructions for the Drive Unit HPR50 of
the drive system
— Do not make any changes to the Drive Unit that affect the performance or
maximum supported speed of your Drive Unit. By doing so you endanger
yourself and others and possibly violate laws. The warranty will be voided
in addition.
— The walk assist must only be used to push the e-bike. Make sure that both
wheels of the e-bike are in contact with the ground. Otherwise, there is a
risk of injury.
—
Make sure that your legs are at a safe distance from the pedals when the
walk assist is avtivated. Otherwise there is a risk of injury from the rotating
pedals.