GS-K3000AB
5
A.
Weighing without container.
If the reading is not “0” or the zero indicator isn’t displayed, press
to display “0” and the zero indicator
appears, then the place objects on the tray, when the stable indicator appears, the value displayed is the
weight of the objects.
B Weighing with container
Place an empty container on the tray ,press
to display “0” after the stable indicator appears, then place
the objects into container ,after stable, the value displayed is the weight of the objects.
3
Counting
Turn on the scale and put on the integral sample, Press
to show S-10 ,press
again to select a
parameter of S-10/20/50,after a few seconds it begin to counting mode. Press
to exit.
4
Power-off and Automatic power-off
A Press
directly to turn off the scale
B If your scale have auto-power off function before shipment, it will auto turn off after non-operation for 3
seconds.
V EXTERNAL CALIBRATION
IMPORTANT:
The scale was professionally calibrated before shipment. It does not recalibrated before use and
will not usually require calibration during its lifetime. However some advanced users who seek optimum
accuracy may wish to calibrate the scale periodically to maintain perfect accuracy. Incorrect calibration can
occur if you do not follow the steps exactly
1
Press
to turn on the scale for warm-up 1-2 seconds
2
Press
to show “0.0” , then press
for 3s, it will show “CAL 0” and “LOAD –XXX g”
3
Place a weight which value equal to the number on the tray (the showed number is 1000g ,that means
you should place a 1000g weight on the tray),,it will display the weight value if success, then return to the
normal weighing.
