Page 7
2. Operating Modes
The function switch is used to select the required mode. The four operating modes
available are…
1.
SET LIMIT
: Switch to
SET LIMIT
when setting the Temperature value at
which the Alarm LED and (optional) relay output are
activated. The relay output is not operational in this mode.
See section 3.5.
2.
STANDBY
: Switch to
STANDBY
to inhibit the Alarm LED and
(optional) output relay action. Select this mode for
calibration, or when automatic control is not required.
3.
AUTO
: Switch to
AUTO
to enable the Alarm LED and (optional)
relay output. These will be activated when the Temperature
is outside the limit value. See section 3.5.
4.
MANUAL
: Switch to
MANUAL
to manually activate the Temperature
control device when the optional relay output is fitted. The
relay output will be activated for as long as the
miniCHEM-Temp
is in this mode, regardless of the
Temperature reading. See section 7.
Содержание miniCHEM-Temp
Страница 2: ...Page 1 Web Site www tps com au ...
Страница 4: ...Page 3 1 Introduction 1 1 miniCHEM Temp Illustration ...
