TPS FGH300, Инструкция по эксплуатации

Страница: 9 / 11

FGH300
9
WEIGHING
Before weighing
Whenever possible, please allow the balance to warm up for 10 minutes after first turning to power on, so that the
balance will function properly and accurately.
Error messages
Err-O: Overload
: Low battery
Calibration may be required before weighing.
Read "CALIBRATION" first and if necessary, calibrate your scale/balance for accurate weighing.
Weighing procedures
1. Press [ON/OFF] to turn on the balance.
When power is turned on, all display segments appear on LED for a few seconds and finally "0" will appear on the
display.
2. Select the weighing unit with [UNIT].
Press [UNIT] to select a weighing unit, e.g. "g"
、
…….
Once the unit has been selected, the selected unit will be displayed to the weight value.
3. Start weighing
If you do not use a container for weighing
Verify the reading is "0". If not, press [ZERO] to display "0".
Place objects on the weighing platform to weigh.
When the reading becomes stable, the stable indicator is displayed.
If you use a container for weighing
Place an empty container on the platform.
Wait for the stability indicator to be displayed and press [TARE] .
Place the objects to be weighed in the container.
When the reading becomes stable, the stable indicator is displayed.
FEATURES

Auto calibration ● Auto shut off (selectable)

Auto zero tracking ● Auto backlight (selectable))

Low battery indication ●g/…. conversion

Lager LED Display

Net weight/stability indication