168 Irving Ave, Suite 303C, Port Chester, NY 10573
|
PHONE
: 914.698.1141
|
FAX
: 914.305.1926
|
|
www.tprlights.com
© TPR Enterprises, LTD.
3
/5
MirageFlex
TM
Non-Waterproof Models
Instruction Manual
CONTINUED
CUTTING
Cut only on cutting lines. Deviating from the cutting lines will cause product failure.
Use scissors, utility knife or X-Acto knife.
FOLDING
Fold only on lines marked on the sheet, same as for cutting.
Folding on any other area will
cause product failure.
POWER INPUT CABLE
Connect at a central point in your display for the most even illumination and power
management.
Use only Class 2 power supply with an output of 24VDC.
If it is necessary to extend the power input cable, please see the voltage loss calculator on our
website
www.tprlights.com
.
JUMPERS
These may be used to connect multiple sheets. – Please see max connection chart. Connecting
more than the recommended number of Panels will cause product failure.
Multiple Panels connected together must be connected to the same power supply only.
DIMMING
MirageFlex
™
Panels are dimmable using our WestPower300-4
™
Dimmers (consult factory).
MOUNTING
Before removing the protective layer of the double stick backing. Lay out your Panels to be sure
they fit properly in designated location.
