Preamble
rISk claSS
The applicable Standard EN-62471 classifies LED Lighting into 4 classes according to their degree of hazard severity.
The table below summarises the risks associated with our standard products.
Colour
Class
Risk
White WHI, Red 630 nm
0
none
IR 850 nm
1
low
TPL Vision can provide guidance notes to minimise photo-biological risks, including the nominal minimum
operating distance. Please contact TPL Vision through your usual representative for this information.
In all cases, TPL Vision recommends the use of the protection glasses that are listed in its catalog.
USer gUIde
This Technical User Guide contains warnings and guidance for correct and safe operation of the product.
These instructions must be followed at all times. TPL Vision will not be held responsible for problems caused
by using the product contrary to these instructions and the Warranty will be deemed invalid.
UnPackIng
This product is packed at the factory using suitable materials for safe transport. To open the package, do not use
any cutting blade to avoid damaging the product(s). Please use the delivered accessories if needed. (Do not use any
other products or equivalents to replace the delivered accessories).
In the event of damage occurring during shipping, it must be reported to the carrier at time of delivery (including
noting the damage in writing on the delivery documents). It is also your responsibility to notify TPL Vision in writing
of the damage within 24 hours of receipt of the package. If these instructions are not followed, TPL Vision reserves
the right not to accept requests for return and exchange of damaged products.
