LED INDICATOR
The SP670 uses a multi-colored LED to indicate operational status.
Orange
blinking LED
–
SP670 is on and ready to connect to the smart device
Green
blinking LED
–
SP670 is connected to a smart device
Red
blinking LED
–
Batteries need to be replaced
AUTO POWER OFF
If the SP670 is not connected to a smart device for more than 8 minutes it will auto power off. When
connected to a smart device the auto power off is disabled.
SCHRADER VALVE DEPRESSOR ADJUSTMENT
The SP670 uses an adjustable Schrader valve depressor. This is useful for use on worn Schrader
valves. If the depressor is unable to engage the valve enough to open it, the SP670 depressor can be
adjusted outward to make better contact.
1.
Using needle nose pliers, carefully turn the Schrader valve depressor of the SP670 counter
clockwise so it is further out towards the fitting opening. This will allow it to engage the test port
valve. See picture below.
