TPI SP597, Инструкция по эксплуатации

Страница: 3 / 8

LED INDICATOR
The SP597 uses a multi-colored LED to indicate operational status.
Orange blinking LED – SP597 is on and ready to connect to the smart device
Green blinking LED – SP597 is connected to a smart device
Red blinking LED – Batteries need to be replaced
Orange and Green blinking LED – Data logging active and SP597 is not connected to the app.
AUTO POWER OFF
If the SP597 is not connected to a smart device for more than 8 minutes it will auto power off. When
connected to a smart device the auto power off is disabled. Auto power off is also disabled during data
logging.
DATA LOGGING
The SP597 has the ability to log readings with a time and date stamp. The maximum number of
readings that can be logged is 5,000.
1. Connect to the SP597 as outlined earlier.
2. Select ‘Logger’ in the View App.
3.
Set the logging interval in minutes/second and the end time and date.
4. Tap on ‘Start Logging’ and the SP597 will begin logging data.
5.
The View app can be disconnected from the SP597 and logging will continue until the end
time is reached or the View app is reconnected and logging is stopped. When the SP597 is
in logging mode and disconnected from the View app, the SP597 LED will blink green and
orange.
6.
Once logging has been stopped or ended, logged data can be retrieved using the View app.