9
8
2. Performing Measurements
1.
Turn the 365 on by pressing the On/Off key. The unit of measure
can be selected at this time. To change units of measure, press and
hold down the On / Off key at the time of power on. The display will
show the unit of measure in the upper right corner of the display.
Once selected, the unit of measure will remain the same after power
off.
After power on, the display will read “OPEN” if no probe is attached.
2.
Attach a temperature probe to the input connector observing the
proper polarity.
3.
Touch or insert the probe into the item under test.
4.
The temperature measured at the probe will display on the 365.
D. Measurement Techniques
1. Controls & Functions
LCD Display
Input Connector
On / Off Key
On / Off Key turns the 365 on for use or off. This
button is also used to select between
ºC
and
ºF
units of measure.
To change units of measure, press and hold
down the On / Off key at the time of power on.
The display will show the unit of measure in the
upper right corner of the display.