TPI 183A, Руководство пользователя

Страница: 18 / 32

Confidential & proprietary information of
Snap-on. Do not reproduce.
• NEVER exceed the maximum amperage of the meter
terminal (either 500mA or 10 amps)
• Always start with the Amps setting first to verify if the
milliamps or microamps can be used safely
• ***REMOVE THE RED TEST LEAD IMMEDIATELY
from the meter when done performing any
amperage test***
• This lowers the chance of accidently checking voltage
(parallel connection) when the meter is connected in
series for amperage
• Blown fuses are most commonly caused by having the
test leads in the wrong meter terminals , NOT by the
wrong dial setting
Digital Multimeter Amperage Testing
18