background image

1) Starting with the 1010 turned off, press and hold down the 

2) Using the Arrow keys, set the year. Once the year is set, press 

3) Using the Arrow keys, set the month. Once the month is set, press

4) Using the Arrow keys, set the day. Once the day is set, press

5) Using the Arrow keys, set the hour. Once the hour is set press

6) Using the Arrow keys set the minutes. Once minutes is set, press 

The 1010 will return to normal operation.

key then 

press and hold down the 

key until two beeps are heard and the time / date 

screen is displayed. 

Year

Month / Day

Hour / Minutes
(24 hour clock, HH:MM)

4.6 Setting Date and Time

The 1010 is equipped with an audible and visual alarm for carbon monoxide. The
alarm level is factory set at 30ppm. When CO above this level is measured, the
1010 will beep and the display will flash red.

The alarm level is adjustable and can be set from 10ppm to 500ppm.

Using the Arrow keys set the alarm point to the desired level. The 

keys select the digit and the 

keys increase or decrease the value.

Once the desired alarm point is set, press the 

key to return to normal

operation.

1) With the 1010 turned on, press and hold down the  

CO alarm level in ppm

4.7 Setting CO Alarm Level

and  

keys

until the CO alarm screen is displayed.  

w

w

w

.

G

lo

ba

lT

es

tS

up

pl

y

.c

om

Fi

nd

 Q

ua

lit

Pr

od

uc

ts

 O

nl

in

at

:

sa

le

s@

G

lo

ba

lT

es

tS

up

pl

y.

co

m

Содержание 1010




















Отзывы: