5
Modem Configuration Guide
F. You should now see your status as
‘Connected
’.
E. Click
OK.
D. You will now be prompted to enter your
WPA Key /
wireless
password. By default, the WiFi password is
printed on a sticker underneath your modem
(WLAN Key)
.
if you did not change it on the modem.
C. Find the SSID (network name) of your modem and click
Connect
. By the default, the network name should be
WiFi-xxxx
(xxxx is a random 4 digit alpha numeric code).
Note: You may notice there are two wireless networks
present. You may connect to either of these.
B. Right click on
Wireless Network Connection
and
click ‘
Connect/Disconnect
’
VR1600v
5. CHANGE OF PASSWORD
For security purposes we highly recommend that you change your password if you are using your default or if you believe your
password security has been compromised. For password information, please visit
www.tpg.com.au/support
.
PLEASE NOTE:
Each time your modem is powered on, it will initialize this automated authentication process after which your modem will
receive a public dynamic IP address (fixed or dynamic depending on your plan) and DNS settings from TPG.
13 14 23
tpg.com.au/support
4. CONFIGURING WIRELESS
To use Wireless, ensure that you already have set up your wireless adapter.
A. Click
Start
->
Control Panel
->
Network and Internet
->
Network and Sharing Center
->
Change adapter settings
WiFi-Y659
WiFi-Y659