Setting up unit for operation
Set waste container onto
ledge as shown.
Install the drain Line as shown
Place unit in desired location
for use. Lock wheels in place
once unit is in the desired
operating position. Unlock
wheel lock to move unit.
General use Instructions
Lift Desired suction valve to be
used. Once the Suction Valve
is removed from the hanger
the motor will automatically
turn “ON”.
Make sure the additional
suction Valve Spool Levers are
in the Closed Position.
Place Suction Valve back in to
the hanger and the motor will
automatically turn “Off”.
During use, if the internal
waste container becomes full
the motor will automatically
turn off. Once this occurs the
unit will begin to
automatically drain the
internal waste tank into the
waste container on the back
of the machine.
Once the draining is complete
the motor will automatically
turn “ON” again.
Note: If the HP holder switch
gets stuck in the on position,
the unit motor will continue to
operate
Содержание PC 2530
Страница 5: ......