TPC Laguna 2000, Инструкция по установке, эксплуатации и использованию

Страница: 20 / 38

!
20!
www.tpcdental.com!
Laguna 2000 Chair Troubleshooting
Problem Cause Solution
Dental Chair does not move
up or down. Chair makes no
sound.
No power
Blown fuse
Power switch off
Blown transformer
Check power source
Check fuse
Check power switch
Check transformer voltage
12vac
Dental Chair will not move,
but makes a beep sound when
controls are pressed Safety switch plate
Limit switch memory erased
Check safety plate
Re-program limit switches.
Refer to motions of limit
controls
Chair makes noise when
motor is running. Squealing Damage to drive extension Check drive extension for
damage
Dental Chair does not go low
or high enough Limit switch moved or is
damaged Adjust limit switch or replace
is damaged
Unable to program pre set
position 1, 2 and 3 Press SET to program presets.
Button may be damaged Press Set. Replace set button
on touchpad.
My chair is on but there is no
control out of the touch pad Touch pad is not connected
Touch pad is burnt out
Connect touch pad
Replace touch pad
My head rest does not stay in
the position that I put it in Set screws in backrest are
loose.
Tighten set screws
Chair arm rest moves very
Easley. Screw is loose that holds
assembly together Tighten screw